3.2L Mechanical Control Ultrasonic Carbureter Cleaner With 200W
Heating Power
Why You Need Whale Cleen Ultrasonic Carbureter Cleaner?
Ultrasonic carb cleaning is a hi-tech process utilising ultrasound
to clean carburetors both internally and externally. The ultrasonic
cleaner heats and agitates a cleaning solution creating cavitation
bubbles which implode (not explode) against the carburetor, these
high forces remove all contamination adhered to solid surfaces and
substrates. This action also penetrates internally, blind holes,
cracks, recesses, etc. ensuring that even the most stubborn
blockages are removed.
Ultrasonic Carb Cleaners are Thorough
When the bubbles implode contaminants are quickly and safely
blasted away from wetted surfaces without damaging delicate
carburetor parts.
These bubbles are so small that they are able penetrate minute
cracks, crevices and blind holes impossible to reach by hand
scrubbing using conventional parts washers or aerosol sprays. These
techniques may also create environmental and disposal challenges.
Ultrasonic Carb Cleaners are Fast
Once parts are placed in the cleaner basket and cleaning initiated
they can complete the job in 25 to 40 minutes (depending on
condition). A big benefit here is that you are free to attend to
other tasks. And, compared to washers and aerosols, cleaning is
completed in an environmentally friendly manner. This is because
the ultrasonic carburetor cleaning formula is a biodegradable
concentrate that minimizes disposal problems.
THE CLEANING PROCESS
1. Wash to remove all external dirt, complete disassembly checking
to make sure there is no obvious damage.
2. All parts are cleaned in our industrial stainless steel
digitally controlled ultrasonic cleaner followed by a detailed
inspection.
3. Precise re-assembly, linkages lubricated and if a multiple bank
of carbs we will bench sync them for you.
Specification Of Z-S02:
| Model | Z-S02 |
| Ultrasonic Frequency | 40,000 Hz |
| Tank Material | SUS304 |
| Tank Capacity | 3.2 L |
| Timer | 1-30minutes ,Digital timer |
| Power Supply | AC 100 ~ 120V, 50 / 60Hz
AC 220 ~ 240V, 50 / 60 Hz |
| Ultrasonic Power | 120W |
| Heating Power | 200 W , Digital Heating |
| Unit Size | 265x165x220 mm ( L x W x H ) |
| Tank Size | 240x135x100 mm ( L x W x H ) |
| Package Size | 340x245x310 mm ( L x W x H ) |
| N.W. | 3.5 kg |
| G.W. | 4.1 kg |
Carburetor Cleaning Feeback:
How It Works?
Ultrasonic cleaners are used in a wide range of applications to
remove virtually any soil or contamination by using the power of
cavitation action.
In addition to plain old "dirt" they remove varnish, gums and other
contaminants that deposit on a carburetor's interior parts over
time.
Cavitation is the term used to describe the implosion of billions
of minute bubbles when they contact parts immersed in an ultrasonic
cleaning solution. The bubbles are created by generator-powered
ultrasonic transducers bonded to an ultrasonic cleaning tank.
Depending on models, cleaners typically operate at an ultrasonic
frequency of 37 to 42 kHz (37,000 to 42,000 cycles per second).
Cleaners are available operating at other frequencies as well as
multiple frequencies.
