Easy Operate Ultrasonic Gun Cleaner With Digital Timer And Heater

Investments in firearms, be it by collectors of antique guns, law enforcement agencies, operators of gun shooting ranges, hunters or shooting enthusiasts of any stripe, can be substantial. Planning to maintain firearms is an important part of protecting your investment in pistols, rifles and similar weapons. Ultrasonic cleaners are widely employed by gun shop repair services, law enforcement agencies, the military and gun clubs, and for good reason. Nothing is better when it comes to removing lead shavings, residues from powders, old lubricants, in fact any contaminant that causes wear or otherwise impacts the performance or degrades the value of the firearm.

Several ultrasonic cleaner options are available to gun owners, whether individuals, a club or public safety organization. But before getting into examples of what to look for we’ll start with a description of why the ultrasonic gun cleaning process is so effective when compared to manually cleaning and lubricating firearms using rods, brushes, pads, solvents and oils. That said, immediate after-use cleaning and lubricating is important before thorough maintenance in an ultrasonic cleaning unit.

Advantage Of Whale Cleen Sonic Equipment:

Our immersible industrial stack transducers are much larger than the competition’s wafer-type transducers. This industrial stack transducer, combined with our patented True Sweep power generator with constant power output, drives the cleaning solution with much greater force. This extra power translates into faster cleaning times using a safe, less aggressive non-hazardous cleaning solution.

The heavy duty stainless steel drain position baskets are easier to use, (no more hand holding above the tank), and will give years of service life. The basket bottoms where the parts rest on round wire have very little contact area with the parts and will not scratch or otherwise damage the finish. In addition, there is no sound absorbing polycarbonate present to reduce ultrasonic efficiency.

Specification:

Specification Of Related Model:

If this model is not suitable for you, please check other in below chart.

Customer's Feedback Of Gun Cleaning:

Coupon Policy:

If you are the first customer of Whale Cleen sonic, you will get US$50 coupon when your purcahse amount over US$500.More discount information,please contact our sales man for more detail.

Comparison of Ultrasonic Gun Cleaner:

 1. Tank Depth: The actual cleaning solution depth is very important for proper parts placement in the wire basket. Parts need to be placed with the grip and sights facing up and the dirty portions of the gun part down on the basket for proper cleaning. This placement faces the transducers at the dirt parts and allows some of the heavy debris to release and drop out and off the parts. Laying gun parts on the side may cause damage to the finish, reduce ultrasonic ability, slow down the cleaning process, and cause removed debris to redeposit on the parts. Having only 2.5 inches of actual cleaning solution depth is not enough to clean field stripped gun parts properly.

2. Cavitation Development: There needs to be free space between the tank bottom and the bottom of the basket for proper cavitation,some of these systems have their basket resting on or too close to the tank bottom which adversely affects the transducer's ability to create sound waves.

3. Baskets: The plastic baskets supplied with these systems absorb sound and make less energy available to the parts. Stainless steel baskets allow sound transmission better and are obviously stronger than plastic. Some manufactures have claimed that stainless baskets scratch the parts, but the reality is that when the parts are arraigned properly in the basket, there are no such issues. ( millions of guns cleaned with no damage). We provide two stainless steel baskets, one dedicated to cleaning, one dedicated to lubrication, so you do not cross contaminate the cleaner and the lube. The competitors use one basket that go back and forth between the cleaner and lube, which cross contaminates solutions reducing the overall effectiveness of the process.

4. Ultrasonic Power: The competitor’s effective power levels start off lower and are actually much lower when you take into consideration the plastic basket resting on the tank bottom design. The remaining energy is simply not enough to properly clean guns in a reasonable amount of time.

5. Heat: We provide more heat than industry standards to get the tank up to temp fast. The competitors units use less heat and take forever to heat up, thus extending the cleaning process time. We use rubber heaters whereas the competitors use what we have found in the past to be troublesome ceramic heaters that have a high failure rate.

6. Tank Construction: We use stainless steel throughout: tank skirt, covers, baskets and lube pan. The strength, life cycle performance, and appearance of stainless steel is far superior to plastic. Not to mention plastics will absorb ultrasonic technology so the more plastic the less performance you will ultimately have. Competitors cutting corners to save costs by utilizing plastic components in their systems are not helping the customer because it is creating a lesser performing ultrasonic cleaner.

We, Guangdong Blue Whale Utrasonic Cleaning Equipment Co., Limited is located in both Dong Guan City and Shen Zhen City, Guang Dong Province. With the trust and support of our customers, we have more than 18 years experience in this filed, Then we want to do some difference from the market, not only selling but also helping.

For distributors, we provide superb equipements and good solutions(include 12 cleaning serise)  for your customer, free training and free aftersales to make long term and win-win result.

For terminal clients, we support u best quality machine and good service and cleaning solution till u make full use of the equipments.

We have strong customer feedback in many industries like Automotive, Molds, Aerospace, Firearms and etc. 

We are here for you at 24/7. Please do not hesitate to contact us if you are interested in our products.