200 Watt Mechanical Timer Ultrasonic Gun Cleaner For Hand Gun
How Whale Cleen Ultrasonic Gun Cleaner Works?
Ultrasonic transducers mounted to the tank bottom produce high
frequency sound waves which cause rapidly alternating high & low
pressure conditions in the cleaning solution. Millions of
microscopic bubbles form and then implode (a process called
cavitation) resulting in an intense scrubbing action that removes
fouling even in the smallest indentations, grooves and impossible
to reach by hand areas.
Using water based detergents with rust inhibitor and heat, unburned
powder, carbon, lint, oil & dirt will be quickly removed from the
field stripped gun parts usually within 4-6 minutes of immersion
with minimal hand labor. Heated ultrasonic cleaning, followed by
rinsing and ultrasonic lubrication with supplied lube pan and
special oil, insures that the parts are moisture free and
protected. After excess lubricant is removed from the parts with
compressed air, they can be lubricated in accordance with
manufacturer's instructions or your S.O.P.
The parts are then restored to factory new level of cleanliness
which could not be achieved by the usual hand cleaning methods. The
process does not affect night sights, rubber grips, and plastic
frames or leave the parts dried out and unprotected.
We continue to lead the ultrasonic firearm cleaning industry with
high quality equipment, chemistry, user friendly innovations and
customer support. The first to offer non-hazardous odorless
chemicals, heated tanks, Sweep Frequency technology and a fast
process. Our combination of features gives you the best equipment
and performance available for your investment and personal safety.
There are over 18 standard systems to choose from, each containing
all required accessories and chemicals. In addition to firearm
systems, there are kits available that will clean and disinfect
hand cuffs, clean disinfect and decontaminate SCBA, respirators and
clean communications equipment. There is a two year parts and labor
and lifetime heater warranty on the table top systems.
Please contact us with any specific application questions via the
firearm system recommendation link on the home page or by phone.
Make GUNCLEANERS your cleaning partner!
Specification:
| Model | Z-04 |
| Tank Capacity | 10 Liter |
| Tank Size | 300x240x150mm |
| Unit Size | 325x265x280mm |
| Packing Size | 435x360x350mm |
| Frequency | 40KHz |
| Ultrasonic Power | 200W |
| Heating Power | 450W |
| Cleaning Time Setting | 1-30Mins Adjustable |
| Temperature Range | 20-80C Adjustable
|
| Net Weight | 7.4kg |
| Gross Weight | 8.5kg |
Cleaning Feedback From Customer:
FAQ:
1. What frequency is better for my parts?
Frequency is suggested based on pollutants in the objects.
28kHz frequency is stronger, better for car/motor/truck/vessel
parts clean(oils, grease,rust,pastes, etc. )
40kHz is better for pcb boards, electronic parts, etc.
Higher precision goods, higher frequency.
2. Can ultrasonic cleaning damage parts?
Ultrasonic cleaning is considered safe for most parts; although in
some cases it is necessary to observe caution. Although the effect
of thousands of implosions per second is very powerful, the
cleaning process is safe.
