4.5L 150Watt Ultrasonic Cleaner Electronics With Heater For PCB
Board
Why You Need Ultrasonic Cleaner Electronics?
Whale Cleen sonic ultrasonic cleaners are an essential part in the
circuit board and electronics assembly process. Whale Cleen sonic
ultrasonic cleaners help to improve SIR test results, reduce
rework, and contribute to in-use PCB reliability. Durable stainless
steel construction, an unconditional 1-year warranty, and
industry-recognized customer service make Whale cleen sonic
ultrasonic cleaners a cost saving step in circuit board assembly
and electronics manufacturing.
Related Model Specification
Please find suitable model for your cleaning job below:
| Model | Tank size | Unit size | Volume | Actual ultrasonic power | Rated ultrasonic power | Ultrasonic frequency | Heating power | Timer | Heating temperature |
| LxWxH(mm) | LxWxH(mm) | (L) | (W) | (W) | (kHz) | (W) | (MIN) | (℃) |
| Z-S008 | 150x85x65 | 175x110x125 | 0.8 | 30 | 30 | 40 | no | 1-30 | no |
| Z-S01 | 150x135×100 | 175x160x210 | 2 | 50 | 60 | 40 | 150 | 1-30 | 0-80 |
| Z-S02 | 240x135x100 | 265x165x220 | 3.2 | 100 | 120 | 150 |
| Z-S03 | 300x150x100 | 325x180x225 | 4.5 | 150 | 180 | 300 |
| Z-S031 | 300x150x150 | 325x180x280 | 6.5 | 150 | 180 | 300 |
| Z-S04 | 300x240x150 | 325x265x280 | 10.8 | 200 | 240 | 450 |
| Z-S06 | 330x300x150 | 360x325x285 | 15 | 300 | 360 | 450 |
| Z-S08 | 500x300x150 | 530x325×285 | 22 | 400 | 480 | 600 |
| Z-S10 | 500x300x200 | 530x325x325 | 30 | 500 | 600 | 600
|
Cleaning Feedback:
How It Works?
Ultrasonic cleaning machines use high-frequencies to cause
cavitation; the implosion of billions of minute bubbles in the
cleaning solution contained in an ultrasonic cleaner tank. The
bubbles are created by transducers bonded to the bottom of the tank
and excited to ultrasonic frequencies by generators. The implosion
of these bubbles blasts away contaminants on the surface of parts
being cleaned.
Ultrasonic can be defined as sound waves that have frequencies
above the upper limit of the normal range of human hearing, which
is about 20 kilohertz (20 kHz or 20,000 cycles per second). While
that is true, ultrasonic cleaners when operating can be heard due
to the action created by what we call ultrasonic cavitation.
How To Clean With Ultrasonic Cleaner?
s it recommended not to clean Circuit Boards (PCB) manually with a
cleaning brush as this can damage the components, the best solution
is to use an ultrasonic cleaner following this process. A wash
cycle time of 60 minutes is required to fully clean the PCB,
dunking after 30 minutes is recommended to help move debris sitting
on the part. Rinsing is an important stage as to insure the
cleaning agent dose not etch or damage the PCB. Recommended rinse
cycle of 5 minutes. A drying cycle time of 10 minutes at 65°C
% Satisfactorily Cleaned: 100%.
Etched effect: None
Discount Policy:
If you are the first customer of whale cleen sonic, you will get
US$50 coupon when your purcahse amount over US$500.More discount
information,please contact our sales man for more detail.
