800ml Ultrasonic Jewelry Cleaner With Power Adjustable For Rings
How Do Whale Cleen sonic Ultrasonic Cleaners Work?
An ultrasonic cleaner is a device that uses ultrasound(Frequency
over 20KHz) to remove the dirt from your jewelry.
The items are placed in a tank filled with a cleaning solution.
After the cleaner is turned on, its motor produces ultrasonic
vibrations through the liquid.
These vibrations break down the dirt particles accumulated on the
surface of your jewelry.
The good thing about ultrasonic cleaners is that they can clean the
parts of your jewelry that are otherwise unreachable when using
more conventional methods.
The Cleaning Process Of Rings:
After you have filled the tank with hot water and poured the
cleaning liquid, you can put your jewelry inside. Don’t put in too
many pieces at once, though, so as not to scratch your jewelry.
Turn the device on and let it run for as long as needed until you
jewelry is clean. (Depending on how dirty the items are, this time
usually varies from 1 to 20 minutes.)
After the cleaning is done, switch the cleaner off and leave your
jewelry inside for another 5-10 minutes so that the dirt particles
that were knocked off your pieces by the sound waves can fall to
the bottom of the tank.
After you take your jewelry out, you can clean it briefly with a
soft brush to make sure that any residual dirt is removed,
especially from the mountings of your rings.
Rinse the items to wash off any remaining detergent, and dry them
with a soft cloth.
Specification Of HS-008:
| Model | Z-S008 |
| Tank Material | SUS304 |
| Package | Carton Box |
| Tank size | 150×85×65mm |
| Unit size | 180×110×130mm |
| Carton packing Size | 245x174x165mm |
| Ultrasonic power range | 0~30W |
| timer | 0~30min adjustable |
| Frequency | 40,000Hz |
| Tank capacity | 800ml |
| pcs/carton | 12PCS/carton |
| N.W. | 1.1 kg |
| G.W. | 1.3kg |
| Warranty | 1 year |
| Certificate | CE |
Customer's Feedback Of Rings Cleaning:
How Often Should You Use an Ultrasonic Cleaner?
The frequency of using an ultrasonic cleaner will depend on how
quickly your jewelry gets dirty.
In general, you can clean your jewelry with ultrasound every couple
of weeks.
If you wear you pieces every day and they accumulate dirt more
quickly, you can clean them every week.
As long as your jewelry is made of materials that can take
ultrasound, cleaning your items more often will not hurt them.
What You Should Not Put in an Ultrasonic Cleaner?
Not all jewelry should be cleaned with an ultrasonic device.
Many gemstones can be easily damaged by ultrasound. Do not put in
softer gemstones such as opals, lapis lazuli, emeralds, turquoise,
etc.
Organic jewelry such as pearls, coral pieces, or amber can also be
damaged.
Also, do not put inside your ultrasonic cleaner gemstones whose
color has been enhanced through heat treatment.
