22L 600W Heat Power Ultrasonic Jewelry Cleaner For Jewelry Makers
How Do Whale Cleen Sonic Ultrasonic Jewelry Cleaners Work?
Ultrasonic cleaning reaches into small cracks and crevices and
lifts dirt, grime, and oil away. The machines produce micro-bubbles
by creating bursts of positive and negative waves in the water. The
pressure from the waves causes the bubbles to grow, and once the
bubbles reach a certain size, they collapse. When the bubble
collapses, energy releases from it. When the bubble collides with
the jewelry, the power is released, knocking the debris loose. It
is a combination of heat, pressure, and force that work together to
clean out the nooks and crevices. Once the machine stops, and the
solution stops moving, the grime will settle, and the oils will
float on top.
Detail Information Of Z-S08:
| Specifications for ultrasonic cleaner Z-S08 |
| Model | Z-S08 |
| Tank capacity | 22L |
| Tank size | 500×300×150mm |
| Tank material | SUS304 |
| Ultrasonic power | 400W |
| Heating power | 600W |
| Timer | 1-30mins adjustable |
| Heater | 0-80c adjustable |
| Frequency | 40khz |
| Control | Digital Control |
| Voltage | Single Phase:100~140V,200~240V |
| Warranty | 1 year |
| Packing | 1unit/Carton Box
|
Cleaning Effect:
How to Take Care Your Ultrasonic Jewelry Cleaner Machine
Your ultrasonic jewelry cleaning machine will be with you for a
long time if you take good care of it. When using your ultrasonic
cleaner, avoid getting the base wet or immersed in water. Water at
the base will damage the electrical circuit of even the ultrasonic
jewelry cleaner.
Also, ensure that the cleaning pot is properly set onto the base –
this also means aligning the two plugs properly to plug the pot
into the base for power to the ultrasonic generators.
In addition, avoid cleaning diamonds, emeralds, and certain
gemstones in your ultrasonic jewelry cleaner. While this will
damage these gemstones, it will also affect the efficiency of your
ultrasonic cleaner.
To avoid any doubt as to what you can and cannot clean with your
ultrasonic cleaner, read the instructions and label to ensure that
your cleaner is safe for use on certain jewelry.
Frequently Asked Questions About Ultrasonic Jewelry Cleaner Machine
Is it really safe for emeralds, diamonds, and opals?
As a rule, stones that are brittle will be damaged when used in
even the best ultrasonic jewelry machine. Emerald, tanzanite, onyx,
lapis lazuli, turquoise, and opal are all examples of stones that
cannot be cleaned with ultrasonic cleaners. That is because these
gemstones are damaged easily when subjected to ultrasonic waves.
Also, these kinds of gemstones which are usually treated using heat
and other methods to bring out their color are easier to ruin. Also
be careful not to place synthetic or fake gemstones in your
ultrasonic cleaner.
Can I clean my pearls and sterling silver, is it safe?
No! It is not a good idea to try to clean pearls, sterling silver
or similar jewelry with an ultrasonic machine. These are not stones
and are easily ruined or damaged. You can, however, use a soft damp
cloth to clean them if you must.
Can I take the tank off this unit?
Not all ultrasonic machines are designed with moveable tanks. Those
that are removable are equipped with a plastic basket that can be
moved.
Can I clean my greasy glasses with it?
Certainly! You can get rid of all grease and grime from your
glasses, especially from the nose guards which carry most grime
build up. It’s a good idea to use distilled water or recommended
cleaning solutions.
