Industrial Ultrasonic Cleaner Three Slots 175L Cleaning Machine with

Heating Rinsing Filtering Recycling Drying

1. Product Features:

1), Drying trough: self-regulation, time and temperature, with drying to complete the alarm notice function;

2), Inner liner material: using 304 stainless steel, thickened to 2mm, manual argon welding, solid and durable;

3), Time Adjustable: 1-99 minutes/hour adjustable, often open;

4), Industrial-grade transducer: industrial head, strong effect, 24 hours uninterrupted work;

5), Filter circulation function: circulation is advantageous to the solvent, saves the cost, the cleaning effect is good;

6), The generator control system: independent generator control system, the control is flexible, can be set according to the user cleaning needs to adjust the ultrasonic power;

7), Heating automatic thermostatic system: 20-95 degrees adjustable, with stainless steel heating pipe, heating speed;

8), Equipment power line: industrial roughing power line, safe and durable;

9), Memory function: the device has independent memory chip, no need to reset after time setting;

2. Product Details:

Blue Whale three-slot type with filter rinsing and drying ultrasonic cleaning machine, is the first tank ultrasonic cleaning and filtration cycle, the cleaning of the oil slick, impurities, dust filtered out; the second tank is the rinsing tank, after the cleaning of the first tank, and then washed in the rinsing tank, so that the cleaning material is cleaner; the third tank is the hot air drying tank, after the cleaning of the first two tanks, the third tank to do air drying, so that the cleaning material can be dried quickly. Three-slot type with filter rinsing and drying ultrasonic cleaning machine, mainly for the cleaning needs of workpieces that need to be cleaned after dust, oil, rust, wax, glue and other dirt, and need to be quickly dried.

3. Specification of LanJ-J348X1​ and Other Related Models, we also can customize the products as per your requirements.

4. Application:

Blue Whale three-slot type with filter rinsing and drying ultrasonic cleaning machine, mainly used in mechanical, electronic, jewelry, optical, pharmaceutical, coating, auto protection and vacuum coating pre-treatment and other related categories. For parts with complex surface shapes, such as grooves, slits, blind holes and deep holes on parts, it has an efficient and rapid cleaning effect. At the same time, it can clean off the oil, rust and oxide on the surface of the parts, and realize one-stop cleaning, disinfection and sterilization.

5. Cleaning Effect:

6. Packing Method:

7. Blue Whale Ultrasonic Cleaner Care Instructions

1). The ultrasonic drive circuit board should be kept dry and should not be stored in a humid environment, otherwise it will be in the risk of burning out the machine.

2). Turn off the power of the ultrasonic generator when the ultrasonic cleaner is not in use.

3). Avoid bumping or violent vibration to the machine.

4). Ultrasonic cleaner generator and cleaning tank should be far away from heat source.

5). Try not to work the ultrasonic cleaner for a long time, stop for more than 5 min. after working for several hours.

6). The machine should be placed in a ventilated place as much as possible to facilitate the machine to dissipate heat.

7). It is strictly forbidden to start without water or fluid, must work above the liquid level.

8). When the ultrasonic cleaning machine uses flammable liquid such as alcohol, chemical to clean objects, please consult with our customer service first before using the machine.

9). Try to avoid the use of strong acid and alkali cleaning agent.

10). In order to ensure the cleaning effect, the cleaning fluid should be replaced in time.

11). After the cleaning is completed and the machine is turned off, use a clean try rag to clean the tank body and its periphery after pouring out the cleaning agent.

12). After using the cleaner, cover it, keep the shell clean, store it in a dry, ventilated and dust-free place.

8. Our Factory

We, Guangdong Blue Whale Utrasonic Cleaning Equipment Co., Limited is located in both Dong Guan City and Shen Zhen City, Guang Dong Province. With the trust and support of our customers, we have more than 18 years experience in this filed, Then we want to do some difference from the market, not only selling but also helping.

For distributors, we provide superb equipements and good solutions(include 12 cleaning serise)  for your customer, free training and free aftersales to make long term and win-win result.

For terminal clients, we support u best quality machine and good service and cleaning solution till u make full use of the equipments.

We have strong customer feedback in many industries like Automotive, Molds, Aerospace, Firearms and etc. 

We are here for you at 24/7. Please do not hesitate to contact us if you are interested in our products.