10L Mechanical Ultrasonic Cleaner SUS304 Tank With Heater For
Carburetor
How Whale Cleen sonic Mechanical Ultrasonic Cleaner Works?
Whale Cleen sonic supplies ultrasonic cleaning equipment in both standard units
for small scale operations and custom configured large scale units
for inline operations and stand alone high volume production.
Ultrasonic cleaning is a process that uses ultrasound (usually from
20–400 kHz) and an appropriate cleaning solvent to clean items from
any oils, greases and other manufacturing residue. The ultrasound
is used with an appropriate solvent for the item to be cleaned and
the type of soiling present. Cleaning normally lasts between three
and six minutes, but can also exceed 20 minutes, depending on the
object to be cleaned.
Specification Of z-04:
| Model | z-04 |
| Ultrasonic Frequency | 40,000 Hz |
| Tank Material | SUS304 |
| Tank Capacity | 10 L |
| Timer | 1-30minutes ,Mechanical timer |
| Power Supply | AC 100 ~ 120V, 50 / 60Hz
AC 220 ~ 240V, 50 / 60 Hz |
| Ultrasonic Power | 200W |
| Heating Power | 450 W , Mechanical Heating |
| Unit Size | 325x265x280 mm ( L x W x H ) |
| Tank Size | 300x240x150 mm ( L x W x H ) |
| Package Size | 435x360x350 mm ( L x W x H ) |
| N.W. | 7.4 kg |
| G.W. | 8.5 kg |
Specification Of Related Model:
If this model is not suitable for you, please check other in below
chart.
| Model | Tank size | Unit size | Volume | Actual ultrasonic power | Rated ultrasonic power | Ultrasonic frequency | Heating power | Timer | Heating temperature |
| LxWxH(mm) | LxWxH(mm) | (L) | (W) | (W) | (kHz) | (W) | (MIN) | (℃) |
| z-02 | 240x135x100 | 265x165x220 | 3.2 | 100 | 120 | 40 | 150 | 1-30 | 0-80 |
| z-03 | 300x150x100 | 325x180x225 | 4.5 | 150 | 180 | 300 |
| z-031 | 300x150x150 | 325x180x280 | 6.5 | 150 | 180 | 300 |
| z-04 | 300x240x150 | 325x265x280 | 10.8 | 200 | 240 | 450 |
| z-06 | 330x300x150 | 360x325x285 | 15 | 300 | 360 | 450 |
| z-08 | 500x300x150 | 530x325×285 | 22 | 400 | 480 | 600 |
| z-10 | 500x300x200 | 530x325x325 | 30 | 500 | 600 | 600
|
Customer's Cleaning Feedback:
FAQ:
1. Can ultrasonic cleaning damage parts?
Ultrasonic cleaning is considered safe for most parts; although in
some cases it is necessary to observe caution. Although the effect
of thousands of implosions per second is very powerful, the
cleaning process is safe.
2. What cleaning solution should I use?
A large variety of different formulas designed for specific
applications. Proper selection is crucial for acceptable cleaning
activity and to prevent unwanted reactions with the workpiece.
3. What frequency is better for my parts?
Frequency is suggested based on pollutants in the objects.
28kHz frequency is stronger, better for car/motor/truck/vessel
parts clean(oils, grease,rust,pastes, etc. )
40kHz is better for pcb boards, electronic parts, etc.
Higher precision goods, higher frequency.
