40000Hz Jewelry Ultrasonic Cleaner 22L Industrial Ultrasonic Bath
Why Do You Need Jewelry Ultrasonic Cleaner?
Jewelry Cleaners are a great way to clean and maintain your
ornaments. Not only do they save you a lot of time and money, they
are also very easy to use and save you the hassle of running to a
jewelry cleaner or making cleaning solutions and spending time and
energy brushing your jewelry.
They make the task of cleaning your valuables very easy. They are
also environment friendly and save you from the harmful and pungent
vapours of regular cleaning solutions. They can also be useful for
cleaning eyeglasses, watches and dental equipment. Hence, they are
a great piece of equipment to have at home.
If you are thinking of cleaning your ornaments at home, some of the
best jewelry cleaners are already listed here to make your job
easy; these are certainly the ones I would recommend you to go for.
If you want to get your jewelry as new as it was bought for your
friend, you can consider these as best friend present because it is
suitable to do so.
Specification:
| Model | Z-08S |
| Ultrasonic Frequency | 40,000 Hz |
| Tank Material | Stainless Steel SUS304 |
| Tank Capacity | 22 L |
| Timer | 1-30minutes ,Mechanical timer |
| Power Supply | AC 100 ~ 120V, 50 / 60Hz
AC 220 ~ 240V, 50 / 60 Hz |
| Ultrasonic Power | 480W |
| Heating Power | 800W , Digital Heating |
| Tank Size | 500×300×150 mm ( L x W x H ) |
| Unit Size | 550×335×270 mm ( L x W x H ) |
| Package Size | 635×405×340mm( L x W x H ) |
| Longest Gun You Can Clean | 480mm |
| N.W. | 13kg |
| G.W. | 14kg |
If this model is not suitable for you, please check other in below
chart.
| Model | Tank size | Unit size | Volume | Actual ultrasonic power | Rated ultrasonic power | Ultrasonic frequency | Heating power | Timer | Heating temperature |
| LxWxH(mm) | LxWxH(mm) | (L) | (W) | (W) | (kHz) | (W) | (MIN) | (℃) |
| z-008 | 150x85x65 | 175x110x125 | 0.8 | 30 | 30 | 40 | no | 1-30 | no |
| z-01 | 150x135×100 | 175x160x210 | 2 | 50 | 60 | 40 | 150 | 1-30 | 0-80 |
| z-02 | 240x135x100 | 265x165x220 | 3.2 | 100 | 120 | 150 |
| z-03 | 300x150x100 | 325x180x225 | 4.5 | 150 | 180 | 300 |
| z-031 | 300x150x150 | 325x180x280 | 6.5 | 150 | 180 | 300 |
| z-04 | 300x240x150 | 325x265x280 | 10.8 | 200 | 240 | 450 |
| z-06 | 330x300x150 | 360x325x285 | 15 | 300 | 360 | 450 |
| z-08 | 500x300x150 | 530x325×285 | 22 | 400 | 480 | 600 |
| z-10 | 500x300x200 | 530x325x325 | 30 | 500 | 600 | 600
|
Cleaning Feedback From Customer:
Tips for Using and Maintaining Jewelry Cleaners
Using the right cleaning solution: Every brand manufacturer will
suggest the kind of cleaning solution which is best suited for the
jewelry cleaner. It is highly recommended to use the same to avoid
any damage. Take care to fill only till the level marked by the
line. Use non-toxic, biodegradable and ammonia free solutions.
Remember to heat it up: For the cleaner to work best, use hot water
for the cleaning solution. Some cleaners come with an inbuilt
heater for the same purpose.
The cleaning process: In order to maintain the cleaner in good
condition, after you take the ornament out, clean the tank with a
soft brush to remove any residual dirt.
What you should not put into the cleaner: Take care to follow the
instructions that come along with the unit to avoid certain items
that can corrode or damage shouldn’t be put into the cleaner. Do
not use items which the particular model cannot clean. Also follow
all the instructions for use, cleaning and maintenance.
Do not Overload: Do not put too many items in the cleaner. It is
better to add them in batches. It hampers effective cleaning and
they may scratch the equipment. Leave the ornaments inside for 5-10
minutes after the cleaning run is done to allow the dirt to settle
down.
Use a parts basket: Without a parts basket, the sinks to the bottom
of the tank and inhibits the transmission of energy through the
water which does not account for effective cleaning. Also it will
scratch the walls of the tank and may also cause the unit to fail.
You could also use a simple spacer to keep the parts off the bottom
of the tank.
