Crawler Type Super Sonic Cleaner For Metal Paers With 2.4KW
Ultrasonic Power
Product Features:
1, cleaning process by touch screen + PLC programmable automatic
control.
2. Air knife water cutting + hot air circulation drying device.
3, the whole machine is made of stainless steel, automatic
transmission of stainless steel mesh belt, smooth operation.
4, the use of special mesh chain transmission transmission of
workpiece, with ultrasonic rough cleaning, ultrasonic cleaning,
bubble over water, cutting water, drying, and other functions of
continuous cleaning and drying equipment.
5, high-speed fan to ensure that the drying box to fully use the
heat, uniform temperature. This product support non-standard
custom, can provide design drawings and cleaning program
This product support non-standard custom, can provide design
drawings and cleaning program
Product details:
equipment mainly spray cycle filter system, spray system, wind
cutting system, chain stepless speed control system and other
functions, the whole cleaning process automatically completed,
stable and reliable operation, to achieve the best spray cleaning
effect.
Cleaning process: feeding → air cutting → spraying hydrocarbon
cleaning 1→ air cutting → spraying hydrocarbon cleaning 2→ air
cutting → spraying hydrocarbon cleaning → air cutting → spraying
rust preventing oil → air cutting → hot air drying → cutting.
The transducer of the crawler type ultrasonic cleaning machine is
fixed on the bottom plate of the cleaning tank, and a liquid is
added into the tank. Will be washed down by the surface of the
dirt, which is numerous small and dense bubble burst when the shock
wave phenomenon. As a result, the machine immersed in the liquid
under the object, with a strong penetration of solid and
extraordinary cleaning, as long as the object in the liquid, both
inside and outside the surface can be cleaned.
Cleaning Feedback:
Detail Information Of z-x 48:
| Specifications for ultrasonic cleaner z-x48 |
| Model | Z-X48 |
| Tank capacity | 175L |
| Tank size | 700*500*500mm |
| Tank material | SUS304 Or SUS316 |
| Ultrasonic power | 2400W |
| Heating power | 6KW |
| Timer | 1-99h adjustable |
| Heater | 0-95c adjustable |
| Frequency | 40khz |
| Control | Outside generator, more stable |
| Optional | Oil filter system, pneumatic lift, rinsing tank, etc. |
| Voltage | 380V/415V, 3phases |
| Warranty | 1 year |
| Packing | 1unit/wooden case
|
Cleaning Effect:
Introduction Of Ultrasonic Cleaner Theory:
Cavitation is the key factor of ultrasonic cleaner theory.
Cavitation is caused by fast crack of millions of bubble in a very
short time. This process will be generated when ultrasonic
wave(Vibration over 20KHz) came into cleaning liquid. When
cavitation happen, it will generate strong pressure on the surface
of cleaning parts which can take away the dirt in micro type.
FAQ:
1. What is Ultrasonics?
The science of ultrasonics is the study and application of
mechanical vibrations above the range of human hearing—typically
greater than 18,000 HZ.
2. What are the advantages of ultrasound over traditional cleaning
methods?
minimize the use of manual labor
make cleaning and degreasing without the use of organic solvents
clean hard to reach areas of products and remove all types of dirt
shorten the processes such as extraction, dispersion, purification,
chemical reactions
eliminates costly mechanical and chemical cleaning of heat
exchangers
3. What cleaning solution should I use?
A large variety of different formulas designed for specific
applications. Proper selection is crucial for acceptable cleaning
activity and to prevent unwanted reactions with the workpiece.
4. Can ultrasonic cleaning damage parts?
Ultrasonic cleaning is considered safe for most parts; although in
some cases it is necessary to observe caution. Although the effect
of thousands of implosions per second is very powerful, the
cleaning process is safe.
