310L 4500W Soak Tank For Grease Filter Cleaning With Constant Working Heater

1. How Does it Work?

1). Ultrasonic Cleaning Systems are based on high-frequency sound waves which are transmitted through a flowing liquid where the piece to be clean is submerged. Treatment takes between 10 and 45 minutes, but no operator presence is needed

2). Ultrasonic waves produce cavitation, in which millions of gas bubbles are generated into the liquid, and then compressed until they implode, releasing huge amounts of energy. This energy hits the dirt, grease or carbon dust over the surface of the objects to be cleaned, removing it without damaging the piece.

3). The result is a micro-brushing phenomenon which cleans the pieces treated. As gas bubbles are only 1 um, they penetrate into every orifice, making Ultrasonic Cleaning best system for highly complex components in any kind of material (cast iron, steel, aluminium, copper, brass, titanium, bronze, some plastics & rubbers, ....).

2. Why You Need Whale Cleensonic Soak Tank?

It is always not a easy job when you doing cleaning job in kitchen because it is always full of stain and grease which is extremeyl hard to clean.This is why Whale Cleen sonic design and produce heated soak tank for commerical kitchen. We believe we not only can solve the cleaning problems but also help you improve your food quality and customer service with this product.

Heated soak tanks are built to sit under the three-compartment sink. What is removed in the cleaning process either floats on the surface or drops down as heavier sludge. There are perforations in the lifting basket—the tank within the tank—that allow the sludge to fall to the bottom of the tank. At the end of each month, the heat is turned off, the tank is drained using the floor drain, and the debris is removed.

3. Cleaning Steps Of Whale Cleen sonic Soak Tank:

Step 1: Pre rinse

Excess debris from item to be soaked.

Step 2: Loading

Fill clean hot water to Max Line of soak tank.

Step 3: Soaking

Put some suitable cleaning powder in the soak tank and let it soak whole night.

Step 4: Removing Contaminant

Using high pressure water or other tool to remove all the contaminat on the surfacte of equippment.

Step 5: Drain the dirty water

Usually it can be used for monthly when you fill full tank of water and cleaning powder. You don't need to drain the water unless it is too dirty to cleaning. When you need to drain the water, please disconnect the power plug at first and better cool the water as well. Connect the extra outlet vavle to the sewer. Make sure the vavle is connected well before you open the drain valve on the soak tank. Remember to clean the basket and soak tank before you use it again.

4. Specification Of LanJ-310:

5. Customer's Feedback:

6. Packing Method:

We, Guangdong Blue Whale Utrasonic Cleaning Equipment Co., Limited is located in both Dong Guan City and Shen Zhen City, Guang Dong Province. With the trust and support of our customers, we have more than 18 years experience in this filed, Then we want to do some difference from the market, not only selling but also helping.

For distributors, we provide superb equipements and good solutions(include 12 cleaning serise)  for your customer, free training and free aftersales to make long term and win-win result.

For terminal clients, we support u best quality machine and good service and cleaning solution till u make full use of the equipments.

We have strong customer feedback in many industries like Automotive, Molds, Aerospace, Firearms and etc. 

We are here for you at 24/7. Please do not hesitate to contact us if you are interested in our products.